Categories: Cyanogenmod 12.1 Unofficial for DOOGEE X5 fully working if you find any bugs comment below This is not a flashable ROM just extract the zip file and copy it into your phone then restore it as a backup |
↧
CM12.1 [working]
↧
Amigo OS V2
Categories: Amigo os V2 ROM for Doogee X5 Bugs: comment below |
↧
↧
HTC ONE ROM
Categories: HTC ONE ROM |
↧
TWRP 3.0.2
Categories: TWRP 3.0.2 FOR DOOGEE X5 now you can mount usb storage |
↧
Custom boot logo
Categories: Custom DOOGEE X5 boot logo flash it using sp flash tool |
↧
↧
Miravision
Categories: Enjoy better display with MIRAVISON Flash via recovery you can configure it in settings; display; miravision |
↧
6.0.1 CyanogenMod 13 For DG800
CM 13 for MT6582 is an aftermarket ROM based on Android Marshmallow. This is the first stable build of CM13 for MT6582. Super smooth, stable and many bugs have been fixed. Camera, Bluetooth and other minor and major bugs have also been fixed. To know what's working and what's not working, look for it down below. This CM13 for MTK is finally usable and stable for daily use.
Note : This ROM can be ported to any MT6582 device running Android Kitkat 4.4.x with kernel 3.4.67
You may have already downloaded the zip file from the link above and copied the zip file in SD card. Restart your device in Philz recovery and make a backup of your device.
Then always from Philz recovery perform a full wipe:
INSTALLATION
1. Download the. Zip file and dump the firmware to the memory card.
2. Loaded in Recovery
3. Making wipes:
1) Wipe Data Factory Reset
2) Wipe cache partition
3) Mounts and storage -> format system
4) Advanced -> Wipe Dalvik Cache
5) Select Install / Instal zip from SD
6) Choose. Zip firmware file and wait for the end of the process.
7) Boot the system is ready.
Multilanguage…
Credit rom from This ROM is powered by www.mtkroms.com
http://www.mtkroms.com/2016/04/stable-cyanogenmod-13-v3-for-mt6582.html
GAPPS 6.0.1 DOWNLOAD
↧
Philz touch, root and resize partitions
Categories: Here again after a loong break. I have no idea what this R08 update does, didn't even find it at the official Doogee website?! But here is my package again with all the required software and images to update your phone and get root access. (Also removed the Device Management malware from the ROM) Instructions [...] |
↧
Temasek’s CM13 For DG800
Installing: Recovery selected clean to install a new rom
1) Flash CM13 ROM
2) Done
Do backup imei, MTK Droid Tools before you sew.
Credits: This ROM is powered by www.mtkroms.com
↧
↧
TWRP 3.02
Categories: Installing the update through existing TWRP (if installed) or via SP Flash Tool Created by "derwanderer" |
↧
Doogee X5
ROM Mobile Doogee X5 – ROM Android 5.1
ONLY MT6580
ROM 3 – Official ROM Doogee X5 version: DOOGEE-X5-B-Android5.1-2016.05.04 – g931bm-dg-a37-wg-hd-64g8g-ddr3 – full_hct6580_weg_a_l-user 5.1 LMY47I
Not compatible with ROM 1 or ROM 2
—————————————————————————————————————————————————————-
ROM 1 – Update Official ROM Doogee X5 version: DOOGEE-X5-Android5.1-V19-2016.03.31 – g931bm-dg-a37-wg-hd-64g8g – full_hct6580_weg_a_l-user 5.1 LMY47I
—————————————————————————————————————————————————————-
ROM 2 – Official ROM Doogee X5 version: DOOGEE-X5-Android5.1-W900-V09-20160226 – g931bm-dg-a37-wg-hd-64g8g-b128 – full_hct6580_weg_a_l-user 5.1 LMY47I
I don't know if this ROM is compatible with ROM 1 or ROM 3
—————————————————————————————————————————————————————-
ROM 1 – Update Official ROM Doogee X5 version: DOOGEE-X5-Android5.1-V18-2016.02.22 – g931bm-dg-a37-wg-hd-64g8g – full_hct6580_weg_a_l-user 5.1 LMY47I
—————————————————————————————————————————————————————-
ROM 1 – Update Official ROM Doogee X5 version: DOOGEE-X5-Android5.1-V17-2016.01.31 – g931bm-dg-a37-wg-hd-64g8g – full_hct6580_weg_a_l-user 5.1 LMY47I
—————————————————————————————————————————————————————-
ROM 1 – Update Official ROM Doogee X5 version: DOOGEE-X5-Android5.1-V17-2015.12.25 – g931bm-dg-a37-wg-hd-64g8g – full_hct6580_weg_a_l-user 5.1 LMY47I
—————————————————————————————————————————————————————-
ROM 1 – Official ROM Doogee X5 version: DOOGEE-X5-Android5.1-V16-2015.12.04 – g931bm-dg-a37-wg-hd-64g8g – full_hct6580_weg_a_l-user 5.1 LMY47I
Gapps include – No Rooted
Language support: Multilang
Install ROM:
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6580_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
↧
Lollipop custom UI
Categories: works good except gestures i didnt find any other bugs if you find comment |
↧
ROM X UI
Categories: ROM X UI FOR DOOGEE X5 GESTURES NOT WORKING |
↧
↧
Temasek’s cm13
Credits :
Thanks to: Ferhung - Fire855 - Hyperion70 – Diparth Shah-Ajit Guraya - Minh Quoc and Karim Gahgah - Aniruddha Adhikary -Team Roger That -Temasek, Arter97
the original rom can find it in: http://www.mtkroms.com/2016/05/stable-temaseks-cm13-for-mt6582.html
Install :
Install only if your device run kitkat rom or other custom 5.1.1 rom
Make backup your rom before install.
Install rom and gapps with philz touch recovery (I don’t have check with TWRP)
Boot into recovery mode.
Make factory reset.
Next install rom and gapps(from SD 1)
Reboot(takes a few minutes)
What’s Working :
Camera
Video recording in stock/google camera is working
Audio in calls
Bluetooth
Auto Rotate
Sensors
USSD
Audio
Mic
RIL
SMS (Receive and Send both working)
WiFi
Data
RIL is now more stable
Dual SIM
Hotspot
Screen Recording
Both storages (SD and Internal) mounting in both Phone and PC
Gapps
Bugs:
GPS not work(any help for fix it?)
For change partition I have install first on 5.1.1 cnreformat4-5
↧
New settings
Categories: New settings for doogee x5 Using root explore copy the APK into system >privapp >settings, make sure r/o is checked Dont forget to backup your settings first Doesnt work on v19 |
↧
STOCK V19 MOD
Categories: Install instructions 1. Install custom recovery TWRP. 2. Copy ROM zip file to sd-card (external). 3. Boot into recovery mode. 4. Now select wipe. 5. Advance wipe & select system, data, dalvik cache, cache. 6. Select install & select downloaded zip file. 7. Install success |
↧
Resurrection Remix v5.6.8 DG800
Installing: Recovery
1) Flash CM13 ROM
2) Flash Gapps
3) Done
This ROM is powered by www.mtkroms.com
Update fix bootanimation
↧
↧
TWRP 3.0.2-0
Categories: Flash with SP FLASH TOOL. Works with ROM R14. |
↧
Doogee Y300 6.0 Beta
ROM Mobile Doogee Y300 – ROM Android 6.0
ONLY MT6735M
Update Official ROM Doogee Y300 version: DOOGEE-Y300-Android6.0-R08 – full_hct6735m_35gu_m0-eng 6.0 MRA58K – t823y-bl-bl66-33fpgu-hd-256g16g-fdd5m-bom18
————————————————————————————————————————————————————————————
Update Official ROM Doogee Y300 version: DOOGEE-Y300-Android6.0-R04 – full_hct6735m_35gu_m0-eng 6.0 MRA58K – t823y-bl-bl66-33fpgu-hd-256g16g-fdd5m-bom18
————————————————————————————————————————————————————————————
Update Official ROM Doogee Y300 version: DOOGEE-Y300-Android6.0-R02 – full_hct6735m_35gu_m0-eng 6.0 MRA58K – t823y-bl-bl66-33fpgu-hd-256g16g-fdd5m-bom18
————————————————————————————————————————————————————————————
Official ROM Doogee Y300 version: DOOGEE-Y300-Android6.0-R01 – full_hct6735m_35gu_m0-eng 6.0 MRA58K – t823y-bl-bl66-33fpgu-hd-256g16g-fdd5m-bom18
This ROM is a BETA
Gapps include – No Rooted
Language support: Multilang
Install ROM:
Install with SP MDT:
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the MT6735M_Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
↧
MIUI V7
Categories: stable ,patch usb sound,patch camera sound |
↧